Search phrases: 5v module, 5v imod, 3.3v module, 3.3v imod, relay module, relay imod
Important! Note "Header Type" Option above for selecting pin header! See "Pin Headers" section below for details.
The im1RL has a single 12V, 7V Relay with relay driving circuitry. The relays can be controlled by 3.3V or 5V logic, making it suitable for any of our Modtronix boards, Arduino, AVR, Microchip PIC or nearly any other project that requires a relay.
This module is designed and manufactured by Modtronix! Only high quality components from reputable suppliers are used! This is NOT a cheap module using no-name components! See "High Quality Components" section below for component details.
It makes the 3 relay outputs (common, normally open, normally closed) available via a 5.0mm Terminal Block connector. The center pin of the connector is common, left (viewing connector from the front) is "normally closed", and the right "normally open". They are also marked on the PCB with symbols.
This board is part of our iMod product range, and can very easily be added to any of our products that have iMod ports. When mounted in an iMod port, the relay is controlled by iMod pin 2. Click here for a list of Netcruzer boards that have iMod ports.
Schematics (pdf format)
|Click to enlarge|
The im1R has two rows of standard 2.54mm (0.1") pin headers. The rows are 0.7" apart, allowing this module to be mounted on a breadboard or standard 0.1" grid prototype board. The picture to the right shows some iMod modules mounted on a standard prototype board.
The pin headers supplied or soldered to this board are selected in the "Header Type" option at the top of this page.
Many of our Netcruzer boards have iMod ports. This board can be plugged into any available iMod port. The relay is controlled by setting pin 2 of the iMod port. The following is some sample code showing how to turn the relay on and off if this module is mounted in iMod port 1.
imod1_ConfDirPin2(OUTPUT_PIN); //Configure pin 2 of iMod 1 as an output imod1_WritePin2(1); //Set pin 2 of iMod 1 - Turn relay on imod1_WritePin2(0); //Clear pin 2 of iMod 1 - Turn relay off
For getting started quickly using this module with our Netcruzer boards, download and modify (as required) a demo project. On our demo project page, have a look at the iMod demo projects for examples on how to use this module with Netcruzer boards that have iMod ports.
This module is designed and manufactured by Modtronix! Only high quality components from reputable suppliers are used! All components have been selected to exceed the maximum rated specifications. The following components are used:
|im1R Datasheet and Schematics|
To pay via PayPal Express Checkout, go to Cart! Paying via this method is very fast, no sign in or registration is required. Your address information at PayPal is used.